View all examples of work
Our advantages
Large selection of decor options
Our catalog contains more than 96 samples: wenge, beech, cherry, Cremona oak, acacia, marble, granite, onyx, malachite, etc.
Wide range of decoration possibilities
Possibility to decorate profiles up to 7 m long and flat products up to 4 m long.
3 years warranty
For peeling of powder coating, incl. for two-tone painting
Strict adherence to deadlines
Order production time is 4-5 working days.
Low prices
The price already includes chemical preparation, packaging and loading and unloading.
Possibility of two-color decorative painting
Creating a surface with two different decor options or combining powder coating with decoration.
High quality materials
Using only high-tech films and primers from the best foreign manufacturers - Transfertex, Menphis, Decoral System, Akzo Nobel.
High performance
Having three pieces of decorative equipment allows you to complete an order of almost any size within a working week!
Development of new technologies
New technologies are constantly being developed and introduced: decorating doors, heating radiators, etc.
Painting technology
The choice of coating composition depends on the required chemical resistance, wear resistance and type of base. Curing of powder paints for wood materials is divided into thermal (hybrid epoxy resin and polyester) and UV curing. Regardless of the method, powder coating of wood is a multi-stage technological process, the adherence to which will determine the quality and performance properties of the final product.
- The wooden surface is cleaned and degreased. If necessary, the wood is sanded.
- Powder coating is applied in a dry state, and the adhesion of the powder to the surface to be painted occurs due to electrostatic action. And since wood has poor electrical conductivity, an electrostatic composition is applied as the first layer through a thin sprayer.
- At the third stage, paint is applied with a spray gun.
- The wood is then placed in an oven to cure.
Oven for curing
In the thermal application method, the prepared wood is kept in an oven for 5-20 minutes at a temperature of about 130C. To increase efficiency and reduce time, UV curing is used. In this case, the wood is placed in an oven at 110C for 1-3 minutes, and then exposed to ultraviolet light for 15 seconds. Advantages of thermosetting coating:
- only one furnace system is needed (radiant heat);
- less time spent on applying liquid paints and varnishes;
- lower energy consumption compared to liquid painting.
Pay attention to: Fire retardant paint: principle of operation and scope, types of paint for metal and wood, the best manufacturers
The disadvantages of the thermosetting method include the fact that high gloss can only be achieved with a large layer thickness. This results in longer cycle times and higher costs. With UV curing it is easy to achieve very high surface hardness. The wood becomes chemically resistant and scratch resistant. At the same time, after painting with UV curing, recoating is impossible. If the integrity of the surface is damaged, repair is not practical. With UV curing, it is difficult to select the ordered tone and color.
Application of decorated elements
Wood and stone decoration is used in the production of a wide variety of products. Office partitions, doors, windows and other elements of building structures are made from decorated aluminum profiles. Decoration is also used to give aesthetic appeal to all kinds of metal products, for example:
- Decorating with wood is important in the manufacture of profiles for the furniture industry . Corners and guides, load-bearing structures and shelves, elements of office partitions are harmoniously combined with the wooden components of the interior, and they are able to withstand heavy loads.
- Metal thresholds for sealing joints are widely used when laying parquet, wooden boards, and laminate. They are no less relevant in places where wooden flooring is replaced by tiles made of natural stone or its ceramic imitation. In this case, the threshold can be chosen in either the color of wood or the color of stone.
- Decorative painting to imitate stone allows you to obtain products for interior decoration of halls, bathrooms, and kitchens. Unlike natural materials, they have high strength and are light in weight, which is their undoubted advantage. Thus, to reduce the load on the floors, in rooms decorated with natural stone, you can use metal suspended ceilings with an imitation of the texture and color of marble, granite, and malachite.
- Metal products with decorative powder coating perfectly resist moisture and aggressive environments , so they are indispensable when creating decorative finishes for special rooms - laboratories, swimming pools, and showers.
- The decor allows the use of finishing materials made of metal in combination with natural ones: stone base, wood walls and additional elements. Providing a perfect imitation of natural material, painting metal to resemble wood or stone makes the product wear-, moisture- and UV-resistant.
Where is it used?
Powder paints for wooden surfaces are most often used in the manufacture of furniture. It is especially suitable for products made from MDF (medium density fibreboard). Kitchen furniture, furniture for home and office are made from MDF with this coating. From wooden parts coated with this paint and varnish material, you can make objects with curved shapes and edges without joints.
Rich palette
The palette of these paints is very diverse, all pigments combine well with each other. Therefore, these paints are widely used by designers when using wooden elements as decoration. Using this material, you can apply any design or inscription to MDF, obtaining an exclusive material for making furniture.
Decorative layer application technology
Decorative painting to imitate wood or stone is carried out when working with a product that has already had a layer of powder paint applied to it. Decoration takes place in a special heating chamber, where, under the influence of high temperature, the coloring matter is absorbed by a layer of powder paint, which acts as a base primer.
Like standard powder painting of siding (metal siding) and corrugated sheeting, imitating wood and stone, the decor creates a coating that has a long service life, practically does not fade, and is not afraid of scratches and impacts. It’s enough just to choose the appropriate color and place an order, especially since decorative painting of metal to look like wood or stone is quite inexpensive.
The main stages of painting metal to look like wood and stone
The ability to use powder paint with various decorative options significantly expands the range of textures and colors of metal siding, as well as a number of finishing and roofing materials made of metal, such as corrugated sheeting. In the standard version, powder painting of corrugated sheets or metal siding allows you to obtain the product in one of the colors of the RAL palette. Decorative painting using thermal vacuum application technology makes it possible to supplement the standard color palette with original shades that imitate valuable wood. This process is called sublimation. Metal sublimation technology allows you to create high-quality images of wood or stone textures on painted metal surfaces that are resistant to abrasion and mechanical damage.NAYADA specialists implemented an original technology of two-color decorative painting of profiles. Our equipment allows you to create a combined surface with two different decor options or combine powder coating with decoration. In the modern industry, this service is gaining increasing popularity.
Sublimation of a metal profile is carried out using a heat chamber and a special decorative film. Under the influence of vacuum and high temperature, the design is transferred to a previously powder-coated product and, under pressure, is securely imprinted into the surface. Acting as a spectacular decoration of the profile, sublimation on metal retains all the advantages of its powder coating.
Choose the texture of wood or stone
View catalog
Metal products decorated using thermal vacuum technology look very aesthetically pleasing. In addition, wood and stone sublimation ensures the perfect recreation of selected textures. The result is unique finishing materials that combine the strength of metal with the nobility and sophistication of natural raw materials.
Already today, the proposed color palette includes more than nine dozen options: from light wenge to Cremona oak, cherry or French walnut. In addition, the technology allows you to decorate metal products with a coating that imitates natural stone.
Advantages of wood-look powder coating
Decorating a metal profile offers the consumer a number of advantages over painting it in a single color using the traditional method. The mechanical strength of powder coating is higher, and the coloring itself, imitating wood, marble or stone, is practically no different from natural materials. The resulting surface structure allows you to hide defects in the base, if any, and the product itself is lightweight, which is especially convenient if you are not painting it like wood, but stylizing it like stone. A profile decorated in this way can be used in a wide variety of areas where it is necessary to combine strength and durability with aesthetics.
Cost of decorating metal to look like stone and wood
| Name | Unit change | Price, incl. VAT RUR | |||
| up to 100 m2 | 101 – 500 m2 | 501 – 1000 m2 | More than 1000m2 | ||
| 1. Profile products | |||||
| Product perimeter less than 100 mm | p.m. | 85,00 | 80,00 | 70,00 | 66,00 |
| Product perimeter more than 100 mm | m2 | 850,00 | 800,00 | 700,00 | 660,00 |
| 2. Flat products | |||||
| Flat products (sheets) decor one-sided | m2 | 850,00 | 800,00 | 700,00 | 660,00 |
| Corrugated sheet overall size 1.2x3000 mm | m2 | 850,00 | 800,00 | 700,00 | 660,00 |
| 3. Conditionally flat products | |||||
| Product height 10-20 mm. | m2 | 880,00 | 830,00 | 750,00 | 700,00 |
| Product height 21-50 mm. | m2 | 900,00 | 850,00 | 780,00 | 720,00 |
| Product height 51-70 mm. | m2 | 925,00 | 830,00 | 790,00 | 730,00 |
| Product height 71-100 mm. | m2 | 960,00 | 810,00 | 800,00 | 750,00 |
| 4. Doors | |||||
| Solid single-leaf door (2100x950) with a collapsible frame and removable hinges | PC | 5850,00 | |||
| Solid double-leaf door (2100x1900) with a collapsible frame and removable hinges | PC | 11250,00 | |||
| Door leaf without frame (2100x950) | PC | 5250,00 | |||
| The frame is not dismountable with hinges (painted in a color close to the color of the canvas) | PC | 700,00 | |||
| 5. Accessories | |||||
| Loops | PC | 70,00 | |||
| Planks | PC | 80,00 | |||
| Top surface of blind control handles | PC | 80,00 | |||
| 6. Samples | |||||
| Sample on a metal plate 60x100 mm | PC | 500,00 | |||
| Sample on a metal plate 100x200 | PC | 700,00 | |||
| Catalog of 79 samples | PC | 10000,00 | |||
| Sample on customer's product | PC | 1500,00 | |||
| 7. Decoration of piece goods | |||||
| Products with less than 500*500 mm depending on the size and configuration of the product | PC | from 250.00 to 1000.00 | |||
| 8. Production cycles | |||||
| Cost of production cycle (up to 4m) | ex. cycle | 5500,00 | |||
| Cost of production cycle (up to 7m) | ex. cycle | 11500,00 | |||
| 9. Additional services for decoration | % of the order value | ||||
| Stripping | from 5% to 15% | ||||
| Pasting | 3,00% | ||||
| Repainting of products (including anodized ones) | 15,00% | ||||
| Disguise | from 6% to 10% | ||||
| Double decor on one ground | 100,00% | ||||
| Double decor on different soils | 150,00% | ||||
| Decor coating plus painting | 135,00% | ||||
| Anti-corrosion primer for aluminum | % of the order value | 15,00% | |||
| Anti-corrosion primer for steel | % of the order value | 30,00% | |||
| Protective soil | % of the order value | 14,00% | |||
| Zinc-containing soil | % of the order value | 28,00% | |||
Full price list for decoration
Reviews
Actual address:
142715, Moscow region, Leninsky district, p. Besedy, st. Promyshlenny passage, vl. 1 page 1
Actual address: More details
LLC "POKRAS.RU"
Legal address:
142715, Moscow region, Leninsky district, p. Conversations, PO Box 231
+7 ext. 130, 131, 132 - “Coloring” section. Working days from 8.00 to 17.00 ext. 133 — section “Manufacture of metal products”. Working days from 8.00 to 17.00 ext. 120, 121 - order readiness. Working days from 8.00 to 20.00
+7 seven days a week from 8.00 to 22.00
I express my gratitude to the company’s employees, and especially to the foreman of the decoration section, Gurgen, for their responsible approach to work, hard work and attentive attitude towards clients.
Dmitriy
17/04/2017
Actual address:
142715, Moscow region, Leninsky district, p. Besedy, st. Promyshlenny passage, vl. 1 page 1
Actual address: More details
LLC "POKRAS.RU"
Legal address:
142715, Moscow region, Leninsky district, p. Conversations, PO Box 231
+7 ext. 130, 131, 132 - “Coloring” section. Working days from 8.00 to 17.00 ext. 133 — section “Manufacture of metal products”. Working days from 8.00 to 17.00 ext. 120, 121 - order readiness. Working days from 8.00 to 20.00
+7 seven days a week from 8.00 to 22.00
The production company Ginterio expresses its deep gratitude for the professional approach to work. We express special gratitude to the employees of the decoration department for their hard work, high professional qualities, and responsible attitude to business.
Director Glukhov A.V.
1 photo
01/12/2016
Actual address:
142715, Moscow region, Leninsky district, p. Besedy, st. Promyshlenny passage, vl. 1 page 1
Actual address: More details
LLC "POKRAS.RU"
Legal address:
142715, Moscow region, Leninsky district, p. Conversations, PO Box 231
+7 ext. 130, 131, 132 - “Coloring” section. Working days from 8.00 to 17.00 ext. 133 — section “Manufacture of metal products”. Working days from 8.00 to 17.00 ext. 120, 121 - order readiness. Working days from 8.00 to 20.00
+7 seven days a week from 8.00 to 22.00
expresses its gratitude to you for the already two-year cooperation in painting and decorating our products. During the period of our cooperation, we noted your competence, efficiency and desire to do your work efficiently and in a timely manner. We would like to especially note the decorating master Gurgen - for his attentive attitude towards the client and high-quality work performed, as well as your managers, who promptly solve the tasks assigned to them and answer in detail all the questions that arise. We hope that future cooperation will bring the same pleasant emotions.
Head of the supply department, Porshnev M.E.
1 photo
19/10/2016
Actual address:
142715, Moscow region, Leninsky district, p. Besedy, st. Promyshlenny passage, vl. 1 page 1
Actual address: More details
LLC "POKRAS.RU"
Legal address:
142715, Moscow region, Leninsky district, p. Conversations, PO Box 231
+7 ext. 130, 131, 132 - “Coloring” section. Working days from 8.00 to 17.00 ext. 133 — section “Manufacture of metal products”. Working days from 8.00 to 17.00 ext. 120, 121 - order readiness. Working days from 8.00 to 20.00
+7 seven days a week from 8.00 to 22.00
Guys from NAYADA, thank you! I painted the radiators to look like wood - I'm happy with the results. Everything turned out neat and natural. They did everything quickly. Overall, thank you again.
Michael
05/08/2014
Read all reviews or leave your own
