How to make a facade of a half-timbered house with your own hands?

Was typical, became original

A user of the portal under the nickname Bavar thought about insulating his wooden log house and, as a result of lengthy deliberation, settled on imitation half-timbered timber. For the facing screen, it was decided to use plywood, which proved its worth as a result of an extreme “test drive”.

I really wanted a half-timbered house façade – I spent almost a year choosing the material, and eventually settled on moisture-resistant plywood. For an experiment, in my yard, on the ground, an element of moisture-resistant plywood (left over from the floors) lay for almost two years. During this period, nothing happened to the cutting - it did not swell, did not delaminate, did not crack, it was not warped, the geometry did not change.

As insulation, Bavar chose stone wool for ventilated facades, 100 mm thick, laid in one layer. The correctness of the choice of the “pie” of the wall in terms of materials and their thickness was checked by a heat calculation program; heat loss of 31.72 kW per hour was quite satisfactory for the topic starter, especially considering that we are talking about a country house.

From the article about home insulation you can learn about all types of thermal insulation materials.

The lathing is made of timber with a cross-section of 40×125 mm - there was a sufficient gap for the insulation, 2.5 cm, which made it possible to do without a counter-lattice. The plywood used is coniferous; this is the kind of piece that has been exposed to rain and snow without harm to its strength and geometry. Sheet dimensions: 1220×2440 mm, thickness – 9 mm. According to preliminary calculations, the weight of one wall of the ventilation façade will be no more than 1.2 tons, based on which metal corners with a cross-section of 90×90 mm were used as fasteners for the supports.

After installing the sheathing, mineral wool slabs were laid, the windows turned out to be “recessed” by 140 mm, but this suited the owner.

A regular edged board imitates half-timbered wood, pine – 150×25 mm, natural humidity, its surface is treated with a sanding machine (about 5 hours are spent), then impregnated with an antiseptic – for bioprotection, color “Rosewood”. The plywood is coated in two layers with white covering paint for exterior use, resulting in a contrast of snow-white walls and almost black boards, which attracted Bavar. To protect the ends of the plywood, a yacht varnish designed for use in extreme conditions was used.

Since plywood sheets are difficult to edge when fastening, they were laid end-to-end. In order to avoid possible deformation and warping in the future, Bavar went over the seams with “parquet flooring” - a compensation gap of about 3 mm was obtained. For complete safety, at the joints of the timber, I also cut along the entire length, 5-7 mm deep - this will help to avoid stress from torsion.

There were no problems when painting the plywood; the paint applied in an even layer, completely covering the knots and minor external defects on the sheets, emphasizing the texture of the material. The layout of the half-timbered frame was carefully selected, since a violation of the proportions could reduce all efforts to zero. However, the result turned out very attractive and organic.

The area of ​​the facade with the pediment was 120 m², the consumption of materials for all the pleasure was as follows:

• Board 25x150x6000 mm - 48 pieces (layout at the seams).
• Board 50x200x6000 mm - 1 piece (front door surround, had to be brought flush with the facade).
• Board 40x125x6000 mm – 38 pieces (lathing).
• Plywood 9 mm, moisture resistant, grade 3, FSF 1120x2440 mm – 52 sheets.
• Insulation 1000x600x100 mm - 28 packages, total 100 m² (I didn’t skimp on the insulation, I didn’t put scraps in the cracks, everything was cut to size, exactly in place).
• Facade paint - 30 liters (one leeward side is covered in three layers, the remaining walls - in two layers).
• Antiseptic – 12 liters.
• Metal corners 90x90x40 mm – 150 pieces (latching fastening).
• Beam support 110x76x40 mm - 36 pieces.
• Self-tapping screws, galvanized nails (with thread), polyurethane foam, brushes, rollers.

​The total amount spent on all construction was rounded up to 112 thousand rubles, which is about 930 rubles per 1 m².

Participants in the topic noticed that Bavar laid the insulation boards sideways, without additional fastening on plastic “fungi” and without windproof film. In principle, the characteristics of rigid basalt slabs allow such a technology, which is what the topstarter took advantage of, but other FORUMHOUSE users prefer to play it safe “just in case.” So, Lirika1983 put a wind barrier on top of the insulation, and in order to get a sufficient ventilation gap, they had to fill in additional sheathing.

We also noticed the obvious overuse of plywood - 52 sheets give a covering area of ​​154 m², with the required 120 m². When cutting sheets, Bavar also did not skimp, adapting to the layout pattern. And I decided to use the waste on shelves, of which there are never many in a household, and on a house for my daughter, since the previous one had already lost its attractiveness and functionality due to its advanced age.

Inquisitive like-minded people were also interested in the problem of ventilation of window slopes and the possibility of rainwater flowing into the insulation due to the strong recess into the facade. This can be solved by drilling holes around the perimeter for air flow, and custom-made metal ebbs will protect from water.

Half-timbered facades are no longer uncommon, but problems arise precisely at the stage of choosing a layout scheme - the boards can visually adjust the proportions of the building, and if you don’t guess right, a modern cottage will turn into a hut. This is what Bavar advises those who are just planning to decorate their facade in the half-timbered style with their own hands.

I started from a photograph of a real half-timbered house. In order not to visually lower the window frames, I raised the second horizontal layout above the border of the window, and this required raising the third horizontal layout above the ceiling level of the first floor, otherwise the first floor would have looked very shabby. The second condition is not to place the diagonal layout in the corners, but to make an indentation from the joint - 5 cm. Third - so as not to lose the pattern, have a board for layout that is no narrower than 150 mm. The location of the vertical layout was determined by the natural joints of the plywood sheets.

The happy owner of another half-timbered facade also joined the theme, absolutely satisfied with her choice. Perela also has a plywood facing screen, a gazebo roof made of polycarbonate, and on the sides, for protection from bad weather, there are transparent plastic curtains that are raised in warm seasons for ventilation. When insulating and finishing the facade, the portal participant played it safe where she could - sheathing made of 15x15 mm timber, on this base - insulation and plywood. To prevent blowing in the corners, the insulation was laid overlapping and the joints were foamed. At the corners, on the plywood, we mounted plastic corners, like on windows, and after all these manipulations we made the layout with a board.

Features of German technology

The half-timbered finish is a kind of grid of wooden beams applied to the cladding of the house in a contrasting color. This solution has a number of advantages:

1. Versatility . Joining with decorative beams is suitable for both small country houses and spacious cottages. The façade can be combined with other style trends characteristic of a particular area.
2. Ease of arrangement. The technology is not difficult. The main thing is to plan the location of the beams in advance and prepare the material.
3. Sophistication. A variety of wall finishing textures and colors allows you to create an exclusive facade. The design suggests unity with nature - the external wooden frame gives the house a special charm.

The disadvantages of the technology include: the relative high cost of the materials used and the fragility of wooden elements.

Selection of material for façade arrangement

The service life, ease of installation and practicality of operation of the cladding largely depend on correctly selected materials. Particular attention should be paid to the base of the half-timbered façade and the printed strips.

Natural wood or imitation

The choice lies between wooden or polyurethane boards. Each material has pros and cons.

Distinctive features of wood beams :

• naturalness and environmental friendliness;
• beautiful appearance;
• the need for careful preparation - treatment with fire retardants and protective impregnations;
• susceptibility to rotting;
• high cost.

A worthy alternative to wood is polyurethane beams . The main advantages of polymers:

• believable imitation of the texture and shades of wood;
• wide choice of colors of false beams;
• light weight - the polymer boards are hollow inside, this finish does not put much stress on the lightweight foundation of the frame;
• excellent technical and operational properties: resistance to UV rays, temperature changes, resistance to rotting, inertness to organic matter and lack of deformation.

An important argument in favor of simulating half-timbered timber with polyurethane beams is the affordable cost of polymer materials.

Options for the base for half-timbered frames

The beams are installed on a prepared base. Three options are popular in frame house construction:

• DSP cladding;
• plastering walls;
• use of OSB boards.

The most practical method is the use of cement-bonded particle boards (CSB). The material has a high density, tolerates longitudinal loads well and is not afraid of precipitation. DSP sheathing gives the frame additional strength.

Composite slabs are the best basis for half-timbered timber. The ratio of price and technical qualities of the material is optimal.

Plastering walls is a labor-intensive process. In addition, given the characteristics of prefabricated houses, this method is not recommended for cladding. Temporary movements of the frame can lead to cracking of the plaster layer.

OSB boards are a budget technology. It is advisable to use the material in the construction of country houses and small buildings.

The nuances of using OSB boards:

• high-quality bioprotection treatment is required to prevent the appearance of mold;
• special attention to the ends of the canvases - with regular contact with water they can swell;
• Over time, OSB boards change color and require painting.

Polyurethane board

At the moment, natural finishing and building materials have a high price, so not everyone can afford them. Thanks to modern technologies, many owners of private houses have found an alternative solution - the use of materials that imitate natural wood, for example, polyurethane boards.

This artificial material has a number of advantages and good performance characteristics, so it is in no way inferior to natural wood. It is worth noting that it is difficult not only for an ordinary person, but also for a professional to distinguish natural wood from a board of this type. Polyurethane board has a low price, light weight and good moisture resistance, which makes it a good alternative to natural wood.

Step-by-step instructions for finishing the facade

Let us describe the sequence of finishing the facade of a house in the half-timbered style with your own hands. The entire course of work can be divided into several stages.

Design and sketch development

The first step is to draw up a layout plan for wooden beams . It is necessary to build on the working drawing of the house itself.

When drawing up a sketch, you should adhere to the following rules:

• the placement of the racks is not tied to the seams of the DSP boards; on the contrary, the facing panels are “adjusted” to the sketch of the location of the beams;
• the upper and lower trim, crossbars, braces and vertical supports should leave the impression of load-bearing rather than decorative elements;
• symmetry is encouraged in the layout of racks and boards; it is advisable to adhere to the same tactics when framing window and door areas.

Required materials and tools

To implement the half-timbered façade you will need the following materials:

• DSP boards with a thickness of 12-16 mm;
• wooden beams 15 cm wide or polyurethane strips;
• bars for fastening the DSP to the frame;
• insulation;
• windproof membrane;
• fasteners – wood screws 3.5*5.5 mm;
• paint, protective impregnation for wood.

The tools you need to prepare are: a hammer drill, a screwdriver with attachments and drills, a grinder for cutting slabs, a level, a tape measure, a spatula, a roller, a square and a pencil.

Cutting and fastening of CBPB boards

Comparing the dimensions and configuration of the walls with the dimensions of the facing slabs, you should cut the DSP. Before installing the panels, it is necessary to “fill” the frame with heat-insulating material, and attach a windproof membrane .

1. Fix the wooden blocks vertically - the fastening step depends on the width of the cut DSP sheets.
2. Drill holes in the slabs: the diameter is equal to the thickness of the screws, the pitch along the edges is 20 cm, in the middle – 40 cm, the indentation is from 1.5 cm.
3. Treat the ends of the sheets with a strengthening primer.
4. Fasten the DSP boards, maintaining a gap of 3-5 mm between the elements. The head of the self-tapping screw should go 1-2 mm deep into the canvas.

Priming and painting walls

At this stage, the walls are finished before attaching the beams. Work progress:

1. Fill the gaps between the CBPB boards with a weather-resistant compound. It is also necessary to process the fastening points - the screw heads.
2. Apply strengthening primer to the walls using a roller. Leave the surface to dry completely.
3. Prepare the paint, thoroughly mix the base with the color and apply it to the walls.

As a rule, one layer is not enough to cover gray DSP boards. To achieve color uniformity, it is advisable to repeat the staining.

Preparation and installation of beams

Boards for finishing the facade must be well dried. Next, the material is sanded and treated with fire-retardant impregnations and protective compounds.

Such measures are aimed at reducing the wood’s ability to ignite and increasing its resistance to precipitation and solar radiation. Antiseptic impregnation protects beams from rot and insect infestations. The final stage of preparation is painting the boards in a dark color.

1. According to the sketch, cut the lumber.
2. Secure the finished elements with self-tapping screws, following the layout plan.

The procedure for working with polyurethane strips is somewhat simpler. They do not require pre-treatment and are fixed to the CBPB with liquid nails.

Workflow Description

In the original style, it involves constructing a frame from thick timber and filling the space with insulation. We will use a modern solution that is suitable for any type of façade and can be completed in a few days. The option I considered is far from the only one, but it is the simplest and most reliable of all.

The technology that we will consider is also suitable as the main method of finishing the facade of a frame house

Half-timbered buildings can be very simple

Stage 1 - collecting the necessary materials

Before starting work, you need to stock up on everything required; the list of basic materials is presented in the table.

DSP boards are the main working material

Polyurethane board looks like old wood

This set of materials is necessary when working

Stage 2 - collecting tools

When finishing the façade for half-timbering, the following devices are required:

• If the frame will be attached to the walls using dowels, it is necessary to have a hammer drill with a drill of the required diameter;
• A screwdriver is necessary both for tightening self-tapping screws and for drilling holes in the DSP. Therefore, do not forget to stock up on nozzles and drills with a diameter of 3.5-4 mm (suitable for metal);

The screwdriver copes with both tightening screws and drilling holes

• Cutting the slabs is done using a grinder with a concrete disc. Cutting boards and bars can be done either with a power tool or with a hand saw;

This is what a concrete disc for an angle grinder looks like

• The plane is controlled by a level of 1 meter in length; measurements and markings are carried out using a tape measure, pencil and square.

Laser level combined with a tape measure - a modern solution

Stage 3 - frame construction

First you need to make a strong and reliable foundation for finishing the facade. The instructions for carrying out this part of the work are as follows:

• First of all, you need to check the surfaces using a level. Find out how smooth they are and whether there are any noticeable differences in height; if the difference is a few millimeters, then you can attach them directly to the surface. If the unevenness is significant, then it is easier to use suspensions;
• The direction of the racks can be in any direction; personally, I prefer the vertical option, but you can also install it horizontally and make a sheathing with jumpers. The distance between the posts should not be more than 50 cm. The location is selected so that the vertical joints of the sheets fall on the block ;
• The hangers are fixed along the line of the racks at a distance of no more than 50 cm from each other. They are located perpendicular to the bar;

Suspensions are located along the line of passage of the bar

• Nails are driven into the wall or dowels with self-tapping screws are placed, and a cord is stretched between them for guidance. After this, the block is attached, everything is simple: the hangers are bent, the element is leveled and fixed with self-tapping screws. When working, do not forget to control the plane by applying a level to several posts;
• If the wall is flat, then the fastening is made directly to it. If necessary, slats or chips are placed under the block;

Before installation, the block must be treated with an antiseptic composition. Moreover, it is better to do this not by painting, but by dipping, by constructing a trough of the required size from film and boards.

The main thing is to set up an even structure

• Insulation is placed between the frame elements. It is cut into pieces slightly wider than the distance between the bars in order to densely fill the space. Try to lay the material so that there are as few voids under the frame as possible;

You can use sprayed polyurethane foam under the DSP

• A windproof film is laid on top of the insulation. It can be secured with self-tapping screws or a stapler. To ensure the best protection of the heat insulator, the overlap at the joints must be at least 100 mm.

For strength, you can stuff a board on the corners

Stage 4 – fastening the DSP

Let's figure out how to attach DSP sheets to the frame:

Each stage is important and affects the quality of work

• First, you need to measure the distance between the bars to determine the optimal width of the sheets. If the finished elements do not fit, then you need to mark them and cut them using a grinder. The work is dusty, so it is better to work in a respirator;

The material is easy to cut

• Then you need to drill holes, they are located in increments of 20 cm along the edges and 40 cm in the middle. The distance from the end must be at least 15 mm. The diameter of the holes should be no less than the thickness of the screw, or better yet half a millimeter larger;

At the preparation stage, treat the ends of the sheets with a strengthening primer. The primary application can be done while they are still in the stacks, and the secondary application when you cut the elements.

Holes are drilled according to this pattern

• When attaching sheets, you need to remember a simple rule: the gap between the elements should be 3-5 mm. While you are tightening the screws, two assistants must hold the DSP in the required position . The fastener is screwed in so that the cap is recessed 1-2 mm below the surface level, this way you will seal the fastening site and make it invisible;

Secrets of decor in the half-timbered style

The facades of houses in the German half-timbered style have some common features in their design:

1. Floors are visually delimited by one or two rows of horizontal beams.
2. There are sashes in the window frames.
3. Entrance doors are mostly solid wood, without glazing.
4. The downspouts, chimney and vents match the color of the beams.
5. The foundation of the house is decorated with natural or artificial stone.
6. In the half-timbered tradition, window sills are decorated with flowerpots and flower pots.

Facade of a half-timbered house: architectural features

The basis of the building is a power frame made of timber, reinforced concrete or steel, assembled in a special way. Its design combines racks (vertical elements), beams (horizontal) and braces (diagonal or inclined). From the outside, the frame of the house is not disguised by anything. This feature creates a recognizable appearance of the style: load-bearing elements visually divide the façade of the building, giving it characteristic expressiveness.

Facade of a half-timbered house

The space between the purlins was previously filled with adobe. Now brick, foam block, aerated concrete, double-glazed windows and the latest generation of insulation are used for these purposes. Ideally, a modern half-timbered house has a maximum glazing area (up to 75%). But in the harsh Russian climate, such construction is unprofitable. In our country, it is more common to decorate the facade with half-timbered wood. It uses decorative overlays that imitate the frame of a half-timbered house.

Decorative elements of the facade half-timbered

The roof of the building is made gable, without an attic, with wide overhangs. Due to this design, the frame and foundation of the building are protected from atmospheric influences. Tiles are traditionally used as roofing (in modern conditions - metal tiles).

Decorative elements of the facade half-timbered (window)

Imitation half-timbered: interesting house designs

Small one-story houses with half-timbered facades look fabulous. Imitation of style in this case allows you to decorate a simple, uncomplicated structure, making it interesting and unique.

The classic roof of a half-timbered house can be gable or hipped, but the modern style allows for complex designs. The finishing of the foundation can overlap with the decor of the walls using natural stone.

Houses on stilts or with a high foundation look natural with half-timbered decor. Several rows of transverse beams encircling the structure help visually separate the two floors from each other.

An alternative to painted plaster is to decorate the walls with decorative bricks in combination with wooden structures. This decorative finish will be more durable. With the help of brick, half-timbered wood can be harmoniously combined with English, Provence or country style.

The interior decoration of a half-timbered house is primarily associated with exposed beams and roof slopes, and ceilings between floors. The walls can be decorated with imitation wood frame, just like the outside. This means that the interior should be dominated by wood, simple shades and light tones of the walls.

Materials for finishing facades in half-timbered style

An ordinary house - wooden, brick, cinder block - can serve as a basis for finishing. The following materials are used for wall cladding.

Polyurethane panels

Covering external walls with polymer panels is the most common and inexpensive finishing option. Boards and bars made of polyurethane do not need painting. The required shades can be selected so that the imitation of half-timbered wood on the facade will look very realistic. Advantages of polymer coating:

• Presentable appearance.
• Resistance to UF radiation, temperature changes, precipitation.
• No deformation, cracks or other visible defects.
• Light weight.
• Inertness to organic matter (mold, mildew, insects).
• Durability.

Polyurethane decor is glued to the facade using special glue (liquid nails, Corundum, Ceresite). The finished coating gives the impression of a wood finish, but the price of the polymer is an order of magnitude lower.

Facade for half-timbered fiberboard

Construction cement particle board is a compressed sheet of Portland cement, pine shavings and stabilizing additives. Produced by pressing. The most common size of DSP is 3600×1200 mm with a thickness of 10 to 40 mm. [vimeoyoutubepopup_v > The plate has low bending strength, but tolerates longitudinal loads well. DSP is in demand in frame house construction because it has increased density and resistance to weather factors. The cost of the panels is in the budget segment. Based on these characteristics, slabs began to be successfully used in finishing the facade of a half-timbered house.

The material is easily cut with a grinder or jigsaw. The blanks, cut to size, are painted with oil or water-soluble paints. After drying, the DSP is attached to the walls with screws, filling the space between the beams. A paneled house becomes warmer; The sound insulation of the walls is increased.

To decorate a half-timbered façade with your own hands, lining, gypsum board, waterproof plywood and other board materials are also used. The organization of work is approximately the same as with the DSP.

Plastering walls

The technology is quite labor-intensive. Suitable for brick and block buildings with a high percentage of wear. For work, it is better to take a waterproof dry construction mixture, the thickness of the final layer of which can reach 3 cm.

If you decide to make a half-timbered facade with your own hands, then the house is first plastered. After complete setting, the plaster is painted in light colors using water-soluble acrylic emulsions. The false beams are made in contrasting colors - brown or black. Now you can purchase special compounds that give a wooden board a patina effect.

All overhead parts are first painted two or three times and dried, and then mounted on the walls in accordance with the project drawing. It is better not to skimp on paint and varnish materials, otherwise the house will have to be completely repainted every year. If wooden boards are used for false beams, they must be treated with an antiseptic and painted on both sides, including the ends.

Architectural features

The basis of the house is a power frame made of timber, steel or reinforced concrete. The structure combines horizontal beams, vertical posts, as well as inclined and diagonal braces. The frame is not disguised from the outside, because this feature is the highlight of the style. The load-bearing elements seem to divide the façade of the building, giving it expressiveness.

In the past, the space between frames was filled with adobe. Now foam blocks, bricks, aerated concrete, double-glazed windows and various types of insulation of the latest generation are used for this. Ideally, modern half-timbered houses are up to 75% glazed. But, in the harsh climate on Russian lands, such construction is often unprofitable. As a result, wall decoration in the half-timbered style, using applied decorative elements, has become more widespread.

In the old days, natural tiles were used as roofing material. These days, this material is very expensive, so most often the roof is covered with metal tiles. It is quite possible to build a half-timbered house with your own hands; the main thing is to study the design features and strictly follow the project.

A half-timbered house has high energy efficiency. This is possible due to the use of modern insulation materials in construction. The advantages of the structure also include stability and strength. The special design of the frame provides an opportunity to save on construction, because the walls require less brick or aerated concrete. In addition, the weight of the house is significantly reduced, which makes it possible to build it even on stilts.

So, the frame parts should be assembled separately from each other. Like a construction set, they are assembled into place using a lift. Most often, the basis of the structure is planed, sanded laminated veneer lumber, made from varieties of softwood. It is treated with special antiseptic and antifungal agents, which protects the wood from temperature changes, moisture, mold and insects. Sometimes metal beams are used for the frame. This only improves the strength of the house. However, its price will increase significantly, because metal is more expensive than wood.

Upon completion of the assembly of the wooden frame of a half-timbered house, the beams should be sanded and treated with special compounds. After this, it is necessary to immediately install the roof. This will help strengthen the structure and protect it from precipitation. At the final stage, the empty space of the frame should be filled, after which you can begin installing windows and doors.

Like all types of building structures, half-timbered houses have undergone some changes. Modern home features focus more on roof overhangs and massive beams. Wooden roundings are no longer used. Externally, the half-timbered house resembles a combination of the styles of timeless classics - Japanese and European. The use of large glass led to the improvement of the style, which acquired a new name - glass half-timbering.

A half-timbered glass house is saturated with light, which has a beneficial effect on the health and mood of its inhabitants. There is another modern material used to fill the walls of a half-timbered house - cement particle boards (CPB). What is this? It is a rectangular sheet made from Portland cement and wood chips. Special chemical compounds are added to it to protect against mold, mildew and moisture. DSP is relatively inexpensive, despite the fact that it has excellent sound and heat insulation properties. The material has low bending strength, however, it can withstand longitudinal loads well. And this makes it possible to strengthen the frame. Aerated concrete is also economical, it is very convenient to finish, and has high thermal insulation characteristics.

DIY facade decoration in half-timbered style

Half-timbered facade (structure diagram)

With certain skills, you can finish the walls yourself. Before starting work, the future appearance of the facade should be designed and a working drawing made, checking the plan of the original Fachwerkhaus. The layout of the imitation must correspond to the technological principles of construction of such houses, otherwise the very idea of ​​half-timbering is lost. You cannot tie the location of the racks to the DSP seams. On the contrary, the panels that fill the frame are tied to its structure. Braces, lower and upper trim, crossbars, beams should leave the impression of load-bearing, not decorative elements.

Let's consider the process of decorating the facade, coupled with the simultaneous insulation of the house.

Tools for work:

• Marker for marking the frame.
• Level and roulette.
• Metal anchors.
• Circular and miter saws.
• Electric drill.
• Hacksaw for metal.
• Trowel and trowel.

You will also need a sealant, universal synthetic glue, dry building mixture, and fiberglass reinforcing mesh. The main materials will be insulation (expanded polystyrene) and glued boards to simulate a frame. The lumber is pre-cut to size, sanded, treated with an antiseptic and painted in the chosen color. When starting to decorate the facade of a half-timbered house with your own hands, first glue the insulation boards to the outer walls of the building. You can also use stone wool, but foamed polymer is safer from an environmental point of view. In the slabs, grooves are selected for the board, which imitates the frame of a half-timbered structure. To cut the polymer, use a hacksaw or a sharp knife. The thickness of the board is initially selected so that a sufficient layer of insulation remains under it. This will prevent the formation of temperature bridges.

The slabs glued to the wall should create a single plane, without protrusions and depressions. Apply an adhesive composition to them and allow it to set slightly. After this, a fiberglass mesh is pressed into the glue, which will later serve as a reinforcing base for applying the plaster mortar.

Do-it-yourself false beams for finishing the half-timbered facade are sewn to the wall directly through the insulation layer. First, the racks and beams are attached, then the braces are adjusted. The gaps between polystyrene foam and the board are filled with sealant. After complete crystallization of the glue, the slabs can be plastered and painted in the desired color.

Conclusion

If you do everything as written in the article, you will achieve excellent results. Making a half-timbered house is no more difficult than covering it with siding or plastering. The video in this article will help you better understand certain aspects of the work, and if you have questions, write them in the comments.

Did you like the article? Subscribe to our Yandex.Zen channel

November 29, 2021

Design, Home design, Finishing materials

If you want to express gratitude, add a clarification or objection, or ask the author something, add a comment or say thank you!

Useful tips for masters

Half-timbered facade (drawing)

Here are some more recommendations for individual developers:

• Fachwerk finishing is used only on low-rise buildings.
• The width of the elements simulating the load-bearing frame of a house should be no narrower than 150 mm.
• The minimum distance between posts is 60 cm (2 feet).
• The frame posts of half-timbered buildings can be installed flush with the facade or protrude from the wall. Decorative false beams are also attached using the same principle.
• The visual separation of the first and second floors is emphasized by two or three rows of horizontal beams.
• Window frames must have small frames.
• Doors for the façade under half-timbered structures are solid, massive, without glazing.
• An excessive or insufficient number of dark beams placed on a light wall will create an imbalance in the overall picture of the style.
• Drainpipes and other technical elements of the building should be brought into line with the design of the facade.
• The foundation of the house is covered with natural stone.
• The half-timbered style is characterized by the use of decorative details: figured ornaments on the heads of beams, carvings on corner posts.

A few recommendations

1. Half-timbered timber can only be used for preparing facades in low-rise buildings.
2. To imitate the frame of a house, an element with a width of more than 150 mm must be used.
3. The distance between the posts is at least 60 cm.
4. The racks are installed flush, that is, at the level of the facade or protrude slightly. The false beam is attached in the same way.
5. To ensure a better view, several horizontal logs must be installed in the area between floors.
6. Small window frames look better.
7. Solid doors without glass are required.
8. The number of dark beams should be in moderation, otherwise the style will deteriorate somewhat.
9. Communication elements should be finished in accordance with the design.

By the way! It will be interesting to know: Technology for the production of decorative stones

The half-timbered design will provide an excellent appearance, without having to bother with constant maintenance of the material. A half-timbered facade is the ideal combination of stunning views, reliability and practicality.

Half-timbered finishing, different styles, do-it-yourself cladding: instructions, photos and videos

In the 15th century, a style of house construction arose in Germany that combined a rigid frame of beams filled with various materials. The roof of such houses was supported by beams and braces.

An ancient half-timbered house in the city of Esslingen (Germany).

Interestingly, many of the houses built in this style have survived to this day.

Modern construction in half-timbered style

The photo shows modern half-timbered cottages.

Modern construction technology often uses the principle of building a house with a frame base. But only ordinary timber was replaced by structures made of more modern materials.

These include:

1. laminated veneer lumber;
2. steel beams;
3. reinforced concrete structures.

Today, the space between the supporting frame is filled with modern heat-insulating materials, for example double-glazed windows. There are practically no restrictions on the use of materials to fill the frame of a building and design the exterior decoration of houses.

The space can be filled:

1. ready-made sandwich panels;
2. prefabricated structures made of OSB and insulation;
3. foam concrete;
4. energy-saving double-glazed windows.

A modern half-timbered house is a highly durable, reliable structure made in a unique style. We can say that modern materials have given a second wind to half-timbered buildings.

A panel-frame house with the walls between the frame beams filled with ready-made factory-produced sandwich panels.

The technology of constructing these houses is rooted in the technology of constructing ancient buildings. The difference is that today the enclosing walls are not a mixture of clay and straw, but foam concrete or mineral insulation, protected from external influence by an OSB board, and the frame is made of racks and beams made of laminated veneer lumber.

Video description

Customers also often fear that the corners of houses made of laminated veneer lumber are blown out. Is this so? Today we will check the corners of the house with a thermal imager:

Traditionally, the distance between the racks is 3-4 meters, but the minimum step between the main elements of the frame is 60 cm. The width of the beams starts from 15 cm. Compliance with these parameters allows you to imitate the power frame quite accurately, following the style.

Traditional decoration of a half-timbered house, photo of a structure made of bricks, panels and frame elements:

To emphasize the design of the walls, the foundation is covered with natural stone. Entrance doors are made solid, matching the color of the frame. Together with the classic white color of the walls, these details form the main features of the half-timbered style.

Nowadays, modern solutions are often intertwined with traditional style features, allowing architects to create houses with a unique look. Thus, glazing of walls is actively used, when the gaps between the beams are filled with multi-layer energy-saving double-glazed windows. Finishing half-timbered timber in combination with glass facades for a finished house is possible when arranging winter gardens, closed balconies, and terraces. The combination of wood and glass looks luxurious.

Imitation of half-timbering

Decorating a stone house in the half-timbered style with wooden boards.

The half-timbered stylization is suitable for those who have already built their own house, but the heart asks for an original exterior decoration of the building’s facade. You can even decorate the facade in this style on your own. The basis is a finished building; it can be made of various materials.

Important. Half-timbered stylization is carried out on the finished facade. If it is assumed that the facade will be plastered, then the surface is plastered and painted before installing the layout of the boards. If the walls are brick, made of facing bricks, then before installing the layout it is necessary to complete all work on jointing.

Materials for styling

Decorative boards made of polyurethane

Decorative finishing of a house in the half-timbered style involves the use of boards, with the help of which a beam pattern is created on the plastered facade. As a result of finishing, the facade will look attractive and stylish.

Step-by-step instructions for finishing the facade of a building with decorative and finishing materials, in this case, wooden boards, consists of the following steps:

1. we select suitable boards, the width of each should be the same and should not be less than 15 cm ;
2. we treat the boards using liquids for aging wood, a special brush for brushing, then with an antiseptic glaze compound with color;
3. on a separate sheet we draw an exact sketch of the entire layout for finishing each wall, calculate the dimensions, angles, slopes;
4. mark the drawing on the facade;
5. we cut the boards in accordance with the sketch, number them;
6. We fasten the boards with screws to the facade, choosing fasteners in accordance with the structure of the walls of the house.

The process will be much simpler if we choose a modern building material as finishing boards - polyurethane boards. The low price, but a wide selection of sizes and colors, makes this decorative material indispensable for finishing in the half-timbered style.

The advantages of such polyurethane boards are that they are light in weight and can be secured with glue. They are moisture resistant and do not crack, unlike wooden boards. And such boards look very natural, they are difficult to distinguish from real ones.

Important. When purchasing a special adhesive for installing polyurethane boards on a facade, be sure to make sure that it is intended for outdoor use, is resistant to temperature changes and is resistant to moisture.

Historical drawings

Part of the drawing on the facade of the house - “St. Andrew’s Cross”

The principle of arrangement of beams in the construction of buildings is different, which creates unique patterns on the facade. It is interesting that all the drawings on the facades of the half-timbered buildings have a specific name.

If you plan to decorate the facade as a half-timbered structure, then you need to understand that it is advisable to attach decorative elements in accordance with historical patterns, imitating a rigid beam frame.

Here are some established terminologies for certain forms:

1. the form of crossing beams, reminiscent of the Latin letter “X”, is called “St. Andrew’s Cross” ;
2. the shape, complemented by a crossbar in the middle, that is, reminiscent of the Russian letter “Zh” , became a symbol of protection from fire;
3. if the side slanting beams of the house intersect in the middle or at a third of the height, then this design is called “Wild Man” ;
4. if the oblique side beams do not intersect, then the structure is called “Swabian woman” .

It’s good to know the meanings of some additional ornamental designs, then decorating the facade in the half-timbered style with your own hands will help make the house not only beautiful, but also decorated with special symbols - amulets .

Let's look at some amulets that are typical for decorating half-timbered houses:

1. curlicues resembling the Latin letter “s” are installed on the corner beams of the walls; it is believed that they protect the home from lightning;
2. scary masks, which are located in the corners of houses, protect the house from evil misfortunes;
3. symbols of the sun in the form of rosettes bring abundance and prosperity to the home.

Imitation of half-timbered timber: materials and their features

Since the basis of the style is a wooden frame, the main task when decorating a house is the choice of suitable materials. The choice of decorative elements comes down to three options:

• wooden beam;
• laminated veneer lumber;
• polyurethane beams.

Wood is the most expensive, heavy, and difficult to maintain material. It has its advantages and looks great if handled correctly. However, polyurethane parts have become very popular.

“Boards” made of polyurethane are very difficult to distinguish from natural ones in appearance Source fasad-exp.ru

Polyurethane overlays are attached to the façade of the house with liquid nails suitable for exterior finishing work. Lightweight, accurately imitating the texture and color of painted wood, such decorative overlays are cheaper and more practical. They do not shrink, are easily replaced if necessary, and are not afraid of moisture and sunlight. Polyurethane beams are not attractive to insects and mold, and even from a close distance they look indistinguishable from wood.

The pattern on the surface of polyurethane beams can imitate old wood with its irregularities, or new smooth beams. Elements are produced with patterns characteristic of different types of wood. In the color palette of polyurethane beams you can find any shades, from the lightest to black.