There's no shame in reviving old shoes with glue. This need may arise due to a lack of money for new ones or because you like the shoes so much that you want to continue wearing them. The only question is how to glue shoes discreetly so that the glue is not visible? By the way, many craftsmen sin with this - even on expensive shoes you can see traces of glue.
But we will go the tricky route - we don’t need others to see the glue on the shoes. In this article, we have collected the best adhesive compositions - according to customer reviews, they not only reliably fasten shoe soles, but are also invisible. Let's figure out which glue is the best!
Shoe glue Novbytkhim Sprut
Volume : 50 ml.
Price : 34 rub.
Novbythim Sprut shoe adhesive is positioned on the market as a shoe adhesive, but is it any good? The manufacturer states that the adhesive is developed based on the formulation of industrial shoe adhesive, taking into account the requirements for water resistance and an elastic adhesive connection. That is, your glued shoes will not be afraid of snow, rain and other unfavorable conditions.
It is intended for any shoe materials except polyurethane. The manufacturer recommends gluing shoes at a temperature not lower than +17 ° C for the most effective setting. The only negative is that the glue is difficult to wash off your hands, but if you work with gloves, this disadvantage will disappear.
Shoe glue Contact 12056
Volume : 30 ml.
Price : 876 rub.
After using this glue, your shoes will live a new life! In any case, this is what the manufacturer and buyers promise. If shoes do not need the experienced hands of a craftsman, then there is no better solution than Contact 12056 . Why is he so good?
It differs from the universal Moment in its transparent consistency, and it is also thicker, which means it adheres materials better. In order for the shoes to adhere perfectly to the glue, do not forget to follow the rules (written on the back of the package). According to customer reviews, the glue performs well in the warm season, but does not withstand frost.
Epoxy shoe glue Anles
Volume : 12 ml.
Price : 105 rub.
The glue, packaged in a cute syringe-shaped tube, has a rather impressive note on the packaging: “Can glue anything” - is that true? According to buyers who tried this product on shoes, the glue is simple epoxy and its capabilities should not be overestimated.
The glue is presented in the form of two syringes - one contains epoxy resin, and the other contains a hardener. There are complete instructions on how to use it correctly - you are unlikely to go wrong. But is it suitable for shoes? As buyers say, it is better to take a proven Moment - it is unknown how epoxy Anles will perform at sub-zero temperatures.
Waterproof EVA shoe glue
Volume : 30 ml.
Price : 60 rub.
Despite the low price, EVA glues perfectly, but only if the shoes are made of EVA. Ideal for gluing rubber shoes, such as fishing boots. If you don't immediately seal your shoes, your feet will get wet, which will inevitably lead to a cold.
It is worth noting that waterproof EVA is a rare product, and if you do not see it in stores, you can order it online, for example, at Wildberries. Reviews about this glue are extremely positive: it glues perfectly so that the shoes do not get wet, and the cut area (or the place where the hole is located) is almost invisible. It's definitely worth the money.
Types of glue
| Name | Variety | Characteristics | Application |
| By purpose | Main bond | What it provides: high adhesive strength | Repair of heels and soles |
| Related bonding | Has a low degree of adhesion, but should provide elasticity to the seam | Suitable for gluing already repaired shoes with other materials (thread, nails) | |
| Additional fastening | Used for decorative purposes | Gluing of material that is not involved in the wearing process (chains, bows, rhinestones) | |
| By composition | Nairite or Polychloroprene | The composition contains nairite or neoprene. Translucent, yellowish composition with a high degree of adhesion. Waterproof, heat resistant, frost resistant. After drying, it does not harm humans. | Suitable for shoes made of materials: leather; shoes made of leather; made of nubuck material; fabric shoes. Copes with gluing rubber soles, for gripping insoles, helps install zippers, and so on. |
| Polyurethane | Has proven itself as a high-strength adhesive. Has a disadvantage: it is difficult to clean from the product | Used in the professional field. Used to repair soles made of rubber, polyurethane and also porous materials | |
| Synthetic rubber | Doesn't hold securely. Non-waterproof, non-frost-resistant. | Suitable for gluing additional decorative material. It can also fix the sole of summer or indoor shoes. Sometimes used for processing internal seams | |
| PVC | A highly elastic seam is ensured with this adhesive thanks to the resin base component. | Used for repairing leather shoes and fabric products. In practice, they are used to eliminate defects in the toe of shoes. | |
| Universal | Easy to use, effective, but does not provide high elasticity to seams | Often used for temporary action | |
| Combined | The composition includes various amounts of components of other adhesives: nairit, rubber, resins | Widely used for adhesion of the top of the product to the base, and is also capable of sealing seams | |
| Area of use | Professional | The compositions can vary greatly, and inexperienced people can damage products using such adhesives | High-quality repairs with a high guarantee |
| For DIY repairs | The composition is less aggressive | Designed for cosmetic repairs and gluing. | |
| Unit volumes | grams, milliliters | Vary by weight | The volume is selected in relation to the required gluing volumes. |
Glue Moment Second for shoes
Volume : 3 g.
Price : 150 rub.
Glue Moment Second has long found regular customers who return to it for any problem. moment is perfect for quickly and reliably repairing leather, rubber, and leatherette shoes.
The main advantages of it are:
- water resistance;
- transparency;
- elasticity;
- instantaneous gluing.
Presented in the form of a gel. According to customer reviews, the rubber sole glues instantly. In addition to shoes, glue can be used for decoupage and in various crafts. Even if the sole of your shoe comes off, the Second Moment will instantly glue it tightly!
Adhesive for leather and shoes Schuh & Leder
Volume : 30 g.
Price : 313 rub.
Numerous positive reviews indicate that Schuh & Leder is a bargain that is worth the money. But there is one rule - the glue does not set instantly; in order for it to stick securely, you need to clamp the shoes in a vice for a day.
This glue is perfect for gluing soft materials such as leather, felt, rubber, etc., both with each other and with other materials. Schuh & Leder is resistant to water, alcohol, as well as concentrated alkalis and acids. Optimal temperature for work: +15 to +30 C. To ensure that the glue holds the shoes well, press down on them for a while.
For reference: apply the glue in a thin layer, and on absorbent surfaces - repeatedly until a film appears.
How to seal shoes at home?
If you decide to use neoprene or polyurethane-based shoe glue, know that the methods for using them are very similar. The main thing here is to understand the instructions and strictly follow all the steps, otherwise the result will be far from the desired one.
- To begin with, the material is cleaned of dirt and degreased using tolulene or acetone.
- Then the surface is treated with sandpaper for better adhesion, unless, of course, we are talking about textiles.
- Glue is applied to both surfaces and wait 3-5 minutes for “Desmokol” and 10-15 minutes for “Nairit”. This is the first layer, which is important both for highly absorbent porous materials and for smooth soles.
- When the first layer has dried, apply the second layer and wait 5-10 and 15-20 minutes, respectively. Before proceeding to the next step, make sure that the glue is almost dry and does not flow.
- An important stage is thermal activation. The adhesion will be much stronger if you first heat the glue on both parts with a hair dryer to 60-80 degrees, and only then connect them.
- Press the parts together and wait until completely dry. For both adhesive compositions it is about a day.
- As you can see, shoe glue will not immediately solve the problem, but all this work is worth it: you will wear your shoes for a long time.
By the way
If you are working with fabric, you can reduce the waiting time slightly and skip the thermal activation step.
Special shoe glue NAVR
Volume : 30 ml.
Price : 174 rub.
If you need a good worker for urgent shoe repairs, pay close attention to special shoe glue NAVR . Sometimes life gives us surprises (and not always pleasant ones), and if your shoes are unstuck, this glue will quickly put them back in order.
NAVR glue is produced in Russia and may well compete with Moment . After gluing the shoes, do not forget that you need to leave them for some time (so that the glue sets well) and press down with a weight (for example, clamps). After 5-6 hours you can notice the effectiveness of the work. It is difficult to say whether the glue can hold such complex substrates as plastic or metal, but it holds rubber perfectly.
NOVBYTHIM "Uranus"
This glue is suitable for repairing shoes with polyurethane soles. Here you can already choose between cold and hot gluing types. To make the glue much stronger, it is better to choose the hot method, since when heated, all its active pecking components are activated. The glue is highly elastic, so the gluing area will not be damaged while wearing shoes. The glue has a shelf life of two years and is sold in tubes of various sizes.
Pros:
- Two gluing methods;
- Glues polyurethane sole;
- Highly elastic;
- Sets quickly;
- Does not deform adhesive materials.
Minuses:
- The glue composition is toxic and flammable.
Shoe glue Moment Marathon
Volume : 125 ml.
Price : 249 rub.
If you notice that your shoes are in need of repair, it is better to put them in order before they completely fall apart. Moment Marathon shoe glue on hand !
When working, this glue does not emit an unpleasant odor, it itself is viscous (like all Moment glue), and does not set and harden immediately. When working, in order not to get your hands dirty, it is best to use a syringe and a needle, which will help push the glue inside. Many buyers noted that they have been wearing sealed shoes for a long time and after repair they look like new.
What is it used for?
Fastening the upper part to the sole involves connecting parts from different materials that have their own characteristics. There are several basic repair methods. One of the most commonly used is the use of glue. It provides a tight fit with no gaps. The composition of the substance must be resistant to moisture, temperature changes, and mechanical stress. If the shoes come unglued, then the same remedy is used when repairing them.
In addition, glue plays a supporting role when used together with threads, nails, and staples. The tool can be used as an additional tool, accompanying, for example, firmware. In this case, it is worth using domestically produced rubber glue. It securely fixes the various layers, which makes it possible to get neat shoes without protruding parts. This is especially important for hard-to-reach places like the toe. An option is possible when the sole is fastened using a different method, and the heel is glued.
Cyanoacrylate glue Moment Super for shoes
Volume : 3 g.
Price : 129 rub.
Shoe super glue Moment cyanoacrylate with a gel-like consistency is suitable for gluing materials such as leatherette, leather, cardboard, wood, rubber, etc. It is ideal and simply irreplaceable when you need to glue shoes.
This glue will prove to be a real magician at work, because it quickly and, most importantly, reliably glues shoes together, giving them new life. I am glad that after work there are no traces of glue left on the shoes, even if they are black. According to buyers, now they will buy this particular glue to glue shoes, because it glues tightly and revives the delaminated sole.
Selection by purpose
You should start choosing an adhesive by defining the task, that is, you need to decide on the purpose. Depending on where the shoes need to be glued, the product is selected for its intended purpose:
- Basics. Used if you need to glue the sole at home or attach a heel. Select products that provide high adhesion strength.
- Related. Used for additional gluing of parts fastened in another way (for example, after stitching with threads). The main requirement of such a connection is elasticity.
- Additional . Used for gluing decorative parts. Can form rigid joints; increased bond strength is not required.
